R&S®ZVT Vector Network Analyzers
Frequency ranges from 300 kHz to 20 GHz, with two up to eight test ports
The
R&S®ZVT8 :- Frequency range 300 kHz to 8 GHz
- Two to eight test ports
- Up to four internal sources
R&S®ZVT20 :- Frequency range 10 MHz to 20 GHz
- Two to six test ports
- Up to three internal sources
The
- General multiport measurements – without any degradation of RF performance and avoiding any time loss due to matrix control
- Balanced measurements with true differential stimulation on up to four differential ports
- Measurements on frequency-converting DUTs, e.g. amplifiers, mixers, receivers, etc., requiring only a single unit and extremely short run times
- Pulsed measurements, e.g. pulse profile or point-in-pulse measurements, with up to 16 receivers
- Multichannel receiver with simultaneous sampling of up to all 16 channels, e.g. for antenna measurements
- Enhanced performance by parallel measurements on several DUTs, yielding high throughput in production
Excellent performance(*):
Wide dynamic range | >128 dB, typ >138 dB (at test ports, 8 port model) |
High output power | >13 dBm (at all test ports) |
High measurement speed | <2 μs per point |
Very short sampling time | 430 ns per point |
Measurement time | 8 ms (8‑port measurement covering 201 points) |
Large number of test points | 60001 points per trace |
Wide IF bandwidth | 5 MHz (30 MHz for pulse profile measurements) |
Internal sources | 2 (2-port base unit) 4 (8-port model) |
Receivers | 1 measurement and 1 reference receiver per test port; up to 16 receivers possible |
| (*) Best possible data, specific options, or 1 Hz IF bandwidth required. For details see “Specifications in Brief” or | |
Models
| Picture | Designation | Order No. |
|---|---|---|
 | 2 to 8 ports, 8 GHz Frequency range: 300 kHz to 8 GHz Test ports: N (f) | 1300.0000.08 |
2 to 6 ports, 20 GHz Frequency range: 10 MHz to 20 GHz Test ports: 3.5 mm (m) | 1300.0000.20 | |
